Choose your favorite camping mug

Before you start, get your camping cups (Emalie cups) ready to be printed. You can also choose several different colors.

Settings

Open your desired motif in 100% black font and select the correct settings.
For Multitrans, the setting “light paper” or “HP brochure paper high gloss” is usually suitable. Do not forget: Always print mirrored!

Inserting the Ghost White Toner

Now insert the white ghost toner into the laser printer and replace it with the black cartridge.
The printer will then initialize briefly and is ready to start.

Use the Multitrans paper

Insert the Multitrans paper available in the Ghost online store into the printer with the white side facing up.
Then click Print!

Result on the Multitrans

The motifs have been printed evenly in pure white on the Multitrans and are now ready for the next step.

Several can always be printed on one sheet depending on the size of the motif!

Cut & Secure

Then cut out the design evenly and stick it to the camping mug with heat-resistant tape.

Pressing process

Place the camping cup with a thin silicone mat around it in the cup press preheated at 140 degrees.
For uniform pressing behavior, an identically unprinted cup should be placed in the press from the other side.
Then press for 3 minutes!

Cooling & peeling

The hot camping cup must now cool down completely. Then carefully and evenly peel off the Multitrans in the water bath.

Fine tuning

You can now remove the remaining water drops with a soft cloth and, if necessary, remove the adhesive residue outside the motif with some acetone-based cleaning agent.

The finished result

After a few simple steps, the camping mug is perfectly printed in white and ready to use!