Printable materials:

• Textiles (cotton, polyester, synthetic fabric, leather, wood, etc.)

Parameters & Instruction:

• 160 degrees Celsius
• Preheat heating plate
• Place A-foil & B-paper on top of each other
• Place on the heating plate and press for 2 minutes with high pressure
• After the time has elapsed, separate the foils directly on the hot plate
• Briefly cut off the edge to remove adhesive residue
• Place the finished A-foil on the textile
• Cover with a matt finish paper for protection
• Press for about 30 seconds
• Let the textile cool down
• Peel off the A-Foil
• Use the Matt or Glossy Finish for pre-pressing

Printable materials:

• Hard surfaces (mugs, glasses, bottles, aluminuim, etc.)

Parameters & Instruction:

• 140 degrees Celsius
• fix the motif on the surface with the heat tape
• Place the silicone mat around it and then in the press
• Press for 3 minutes at high pressure
• Then allow to cool completely
  Remove the foil under water
• Also available in gold & silver

Suitable for:

• Makes the transfer print on the textile durable and gives a matt / glossy effect
• Protection against direct contact of textile and heating plate

Parameters & Instruction:

• Applicable up to 200 degrees Celsius
• Pressing for approx. 10 seconds on a textile
• Usable several times

Printable materials:

• Transfer to the skin
• Alternatively can also be used on hard surfaces

Parameters & Instruction:

• Print the thicker paper with your motif mirrored on it
• Connect the paper with the adhesive foil
• Cut out the motif neatly
• Peel off the adhesive foil
• Stick the motif on the skin
• Moisten briefly with water
• Peel off and you are done

Printable materials:

• Uneven hard surfaces
• Non-heat resistant surfaces
• Model making lettering

Parameters & Instruction:

• Print the decal with your motifs
  Cut out the motifs evenly and roughly
• Put the motif in cold water for about 30 seconds
• Carefully transfer the motif onto the surface